How to Design an Xbox 360 Controller Custom Paint Job – By MyCustomXbox
December 23rd, 2009 | 
Author:
This step by step tutorial will guide you through the process of how to design a paint scheme for your Xbox 360 controller. By the end of this tutorial you should know how to design multiple different masks and how you should apply those masks during painting. Brought to you by www.MyCustomXbox.com Share your controllers with MyCustomXbox on Facebook at http and Follow MyCustomXbox on Twitter at twitter.com . And Remember, Everyone Should Know How To Paint an Xbox 360 Controller!…
Posted in 
Tags: 
You can also use green painter’s tape. It works just as well.
if u don’t have a excactor-knife then just use a stanley knife… and if you don’t have 1 a those then i think that you can afford one, if you can afford all the other things needed
Anything from 3M.
there the same
there the same
the blue (aka painter’s tape). Made to leave no residue.
wots better masking or that blue tape
You can use a razor blade man. The only reason he is using a knife like that is because it’s easier to hold and make cuts with.
Could i use a razor blade or do i need a knife like that?
gunna try the monster one
next make a transformer controller
sick
do we have to use a primer in the beggining or should i go ahead and spray it?
3m scotch painters tape
ok thnks
painters blue tape is what he used scott
what kind of tape shall i use
take a small screwdriver and snap out the middle pin. then you can just unscrew it. I did 3 today
thats what i was wondering to wat bit is that it’s like a star
u can get a xacto nife 4 like 3-4 dollers
could u show a vid on how to make it like a rising sun
how do you i get my controller apart?
Nice vid,also right now im using my xbox, since i suscribed to xboxunleasher.blogspot. com im very very bussie downloading a tons of games also they teachme how to do firmware modification
same
i so badly wanna do this